Vengeance-Music

Multiband Sidechain
VERSION HISTORY:

Version: 2.0.2

changes:

- Added a fantastic sounding 3rd filter type called "Steep" with very hard and clean band separation!
- Fixed a bug with loading projects and BPM scale if BPM was different to 128
- Mac: Added support for Command-Left-click in he display
- Several small improvements and bugfixes
- Split Frequency knob behaviour is now more logarithmic (smoother adjustment in the bass area)

Version: 2.0.1

changes:

- Massively improved loading times of old presets / old projects
- MBS does not crash Logic anymore, while Logic is closing
- Fixed a problem in the installer. The installation on OSC 10.4 was impossible
- The "link" button has a new design

Version: 2.0.0

changes:

- Complete new engine (Metrums program engine)
- New rubberbands for the envelopes and the EQ. They work much smoother now
- Readout added: Envelopes and EQ have a value readout now
- A lot small performance improvements
- New improved click filter. All triggermodes should be click free (adjustable precision)
- New smooth FFT display
- EQs can fully be modified in display (like in Metrum)
- EQ dB gain has been changed from +/- 20dB to +/- 10dB
- Low band / high band volume is taken into account when displaying band-effect strength visually
- Lowest possible split frequency set to 22Hz
- Added trigger-hold mode: MIDI mode can hold the envelope as long as the midi note is not released (you can turn this on/off on the sys page)
- Background scopes can now display output signal or trigger signal
- Added 2 differend draw modes for the background scope: "Synced" (zero position at trigger) and "Flow" (moving from right to left)
- FFT can display input or output
- Input / output VU has a peak hold line now
- Envelope times are linked/fixed when changed by the dials or automation (can be switched off on sys page)
- Bug Fix: Transmitter Error Code 5
- Low Band and Highband envelope can be linked, so that any change made to one envelope is also done to the other
- Smoother dials: the graphic resolution / no. of steps is doubled now
- Transmitter now has a "compensation" button. It can be turned off now, for hosts which do not support delay compensation
- Host sync trigger mode can now be shifted 50% positive or negative in time. This is good, to manually compensate delay causing effects (like UAD etc...) which have been used before MBS

Version: 1.0.6

changes:

- MIDI velocity bug (when you use MIDI via the "Transmitter" Plugin) fixed. It now responds correctly to velocity data
- A memory bug fixed, which occurred on specificif machine settings
- Further improvement of the sync (Audio Mode). It should now be much more stable in some hosts (especially on mac)
- Transmitter now shows an errormessage, if more than one instance is running or if an error occurred during channel-initialization
- Performance optimization: VPS now needs less CPU!
- Clicks removed, when Envelope Curve crosses -1 / +1
- Hi Band Volume does not react to changes of Low Band Volume anymore
- Hi Envelope Attack Time did not react to changes, if Low Envelope Attack Time was "0"
- Scope Display in Audio Mode is now working correct in Cubase SX1
- AU: VPS MBS has a real Sidechain Input now! No transmitter is needed anymore. Just send your trigger signal into the 2nd bus (Sidechain) and activate Audio Triggermode. Adjust the Sense- button and have fun.
- VST: Quad Channel Mode (L/R/Ls/Rs) is now supported! Send your Triggersignal to Ls/Rs!

Version: 1.0.5

changes:

- VPS MBS now reacts to MIDI velocity! (the more/little velocity, the more/little sidechain effect)
- Automatic BPM scaling: All Presets were designed for 128BPM, if you used a preset at 140BPM for example, the envelope was not in sync with the new tempo. this is now history! The PlugIn automatically matches the tempo and adapt all envelopes to it. You even can make tempo automations and the MBS will follow! (You can turn off BPM re-scale at the SYS page)
- You can now route a MIDI track directly to the "Transmitter". The Transmitter will send this MIDI trigger to ALL MBS instances, which are set to "audio" recieve mode. So it is possible now, to trigger all MBS in your project with one single MIDI track! (This works with the new velocity feature too)
- new function: "Restore Factory Bank" and "Restore Factory Patch" (by clicking on the memory button you can reset your current bank or your selected preset to factory state)
- some minor bugfixes (Transmitter sync stability etc...)
- automation issues fixed (the automation curves should now be drawable "smooth" and without crackles)

Version: 1.0.4

changes: