Vengeance Producer Suite Avenger 2

2.4.1 (Hotfix)
- fixed a random crash when any global latch mode (latch first note, latch independent ) is active
- fixed arp not reacting correct to note-off and note-on in specific circumstances
- added sample stacker curved velocity fade ranges.

2.4.0
- added new ARP mode: "Custom". This new mode allows you to define new patterns freely - apart from up/down/alternate/etc. Even polyphonic notes are possible.
- added 3 new insert FX
- Ruta Chorus - despite the name, this new multi-effect also allows to create fully customizable reverbs, flanging and Special effects
- Ruta Distortion - a new distortion effect for warm, mid range drives, ideal for chords or basslines. Has 4 different distortion algos.
- Phase Puncher - the "phaser trick" to create spiky attacks and Psy-basses. Let you stack up to 64 Phasers in a row.
- added new modsource "Math/Increment N vc", which is per voice incrementing - each new voice has a new value.
- added options when generating previews for single presets. (octave, duration, chord/single note etc)
- 50 new Q4ntum Presets by Manuel Schleis and many more other new FX presets... 70 new Arp Presets (for the new "Custom" mode)
- change: removed the load arp Sub pattern from arp pattern context. Hold shift button when you load a ARP-Module Preset to load the pattern into the current selected ABCD slot.
- fixed instable AMP envelope attack timing - now you can define accurate and stable spiky attacks for percussion / kick design
- Fixed unstable AMP envelope attack timing.
- Fixed an issue causing hanging or incorrect notes when bouncing a project with chord detection enabled in ARP or OSC modules.
- Fixed jumping note issue in ARP UI when releasing the mouse button during selection.
- Fixed crash occurring when changing sample rate if an OSC used parallel filter mode.
- Fixed noise burst/crash when using "Noise Verber" in the OSC noise generator as a sample.
- Fixed error where AKWF shapes were either invisible or replaced by factory shapes.
- Fixed issue with WAVETABLE-Oneshot: When the envelope finished, it looped back to the first envelope value instead of staying at the last.
- Fixed display error when modulating OSC-pan of OSC 1 and switching to another OSC; the modulation display incorrectly showed OSC 1 modulation.
- Fixed slow volume changes for drum slot/loop samples.
- Compressor FX now correctly displays modulated threshold values.
- Fixed an issue with legato and ratchet in ARP where no ratchet notes were played.
- Fixed rare note hang issue in Logic Pro X (possibly other DAWs) when using ARP and legato mode on an OSC.
- Fixed an error in ARP randomizer where ratchet mode could be incorrectly applied to silent parts of the pattern.

2.3.1
- fixed an rare crash when loading a preset with custom samples in the drumkit
- fixed an issue in routing display when that could cause the to display items with name "#ERROR" after removing a routed module
- AMP Sustain param was ignored in UNDO.
- fixed arp to midi export on Triplet Speeds
- fixed issue where wrong DrumsQ speed was displayed after changing the drumkit-preset with cursor-keys.
- macOS: fixed issue with changing SYSTEM-ID. A new SYSTEM ID might be generated after this update, but should not change anymore

2.3.0
- Avenger will now try to download a new keyfile when an expansion is imported via drag'n drop when the current license file has not the license for the new xp yet.
- lfo cycle end mod sources ( alternate, increment 4..32)
- osc noise density parameter added, with "single click" option
- an organic noise sample can be selected as noise source
- osc noise sample pitch added.
- added option to bypass the filter and shaper process for an osc noise, the noise will be mixed to the voice at the amp position in the route
- added new modsource "Math/Incrementan N vc", which is per voice incrementing, each new voice has a new value.
- added loop start/end for wavetable envelope when its not in WT-Squencer mode.
- added osc octave divider mode to emulate old analog phase behaviour ( set osc start phase above 100% to activate )
- Hovering the mouse over the drumkit name display below the drumkit browser will show the expansion and DK Name in the DATA-Readout. ( if you forgot where it was from... )
- Macro Dials in "Snap to center" mode will set default value to center(50%) instead of 0%
- Improved preset loading times
- issue in Chorder Mute Main voice when Specrat Granular is used.
- DrumSlot Editor PitchRange was using a pop up menu from time scale.
- Sample Editor did display the wrong sample length when chaing wave to the corresponding played sample.
- fixed an issue with copy paste a trance gate where several paramters where not updates in the ui.
- fixed an issue with initialPath with fx preset save as function.
- "Save Preset as.." option should open in the correct last folder again. not the Filesystem Root, when the last preset or folder was moved
- drumsq: velocity y-range fixed.
- fixed crash in arp pattern copy/paste
- mod envelope: DrumSQ trigger mode did also retrigger on global first note.
- midi import/export for drums will work on B-C-D patterns as well.
- issue with random LFO and HOST sync where new random value was triggerd too often
- aa reverb pre-delaytime not accessable via mod source drop.
- Trashverb Color Parameter not reacting to modulations
- macOS: when using left mouse cmd key, and changing the inner dial value will turn the out dial too.
- fixed an issue in VST3 wrapper midi CC handling

2.2.0
- Added Drum SQ multi pattern.
- Added formant lock to single loop osc mode to preserve formants while pitching 12/-12.
- Any multisample displays will switch to the sample for the recently played note.
- New icons for preset preview.
- Reworked previews: added categories with different play lengths, changeable on the sys page.
- Preset -> update preview now displays a small progress on the file in the browser instead of an annoying popup.
- Fixed an issue where the drumkit browser had an incorrect scroll size after renaming a preset in a custom expansion.
- Sound browser now shows the correct selected sample for the slot in osc stacker mode when changing the slot.
- Fixed arp ratchet 7-in preset having a wrong value.
- Renaming a preset in a custom expansion that has a preview will also rename the preview correctly.
- Fixed an initial click sound when modulating oscMaster, DrumMaster, or MasterVol from high to zero on the first voice.
- Fixed another issue with osc velocity.
- Fixed adding a shaper module not displaying the correct selected initial shaper model.
- Fixed pitch envelope used as mod-source on a non-per-voice target being triggered by drum voices.
- Fixed an issue with MIDI export when speed is triplet or dotted.
- Fixed an issue with macro button modulation where the final value now behaves more like a button than a dial.
- Fixed a crash on windows when file load/save dialog was open while DAW was about to get closed by the user.
- Fixed an issue where osc keytrack was not correct applied when using copy/paste
- Fixed a click sound in TG when stereo width is not 0% or 100%
- Fixed AAX timeout on "ALL NOTES OFF" midi cc

2.1.1
- fixed: TG display shows wrong init settings after a new TG module was added
- fixed: Harmonizer Enabled, Hamronizer Voices Enabled display correct modulation state even if no voice is active
- fixed: Velocity was ignored when a osc was in single loop mode.
- fixed: modulating harmonizer on/off did not respond correct.
- fixed: avenger reported wrong latency on other samplerates than 44100
- fixed: drum loopsample preview working again.
- fixed possible deadlock in host notification of latency change
- fixed a crash on mac when browsing presets
- fixed an issue where loading a custom preset, oscs could load a single loop custom sample as "freeform" mode in specific circumstances
- fixed mixer drum routing selector does not recognize when fx bus was added

2.1.0
- ADDED: FX AA PEAK LIMITER
- ADDED: FX AA PEAK COMPRESSOR
- ADDED: FX AA WHA WHA
- ADDED: FX VOWEL FILTER
- ADDED: osc harmonizer
- ADDED: osc chorder main voice muteable via preset browser menu
- ADDED: NEW PARAMETERS to StereoMatrix fx
- ADDED: Preset-Preview can be played with DAW-BPM to get a better feel how it sounds in your project.
- ADDED: volume-control for preset-preview in presetbrowser.
- fixed: a fx will display "Default Preset" instead of "untitled" when a new instance is loaded.
- fixed: drum slot aux routing pulldown not updated correct after preset load
- fixed: mod-matrix "add target" was showing inactive routing elements
- fixed: drum loop sample is still visible in the scope after removing the sample from the slot
- fixed: osc velocity zone was ignored when osc is in multi-loop mode.
- fixed: trigger module saves user samples in the preset now.
- fixed mod-env osc-x trigger where keyzone was not taken into account on note release.
- fixed an issue where last ratchet note may slide, even if the gate is lower than 100%
- fixed a crash when try to copy/paste to master filter
- fixed click-sound issue in spectral playback when looping a sample.
- fixed a cpu spike that could occur when using random-arp-auto-dice
- fixed an issue where a fx preset is not selected correct when using the "save preset as..." function in the fx preset browser.
- improved stability. fixed several crashes that could occur while loading a preset.
- improved: when saving a preset via the memory button into a custom expansion, the preset will be located/revealed in the expansion-preset-browser

2.0.6
- Added upwards/downwards OTT compressor FX.
- FIXED: Crash in ProTools when loading Avenger.
- MEMORY button -> SAVE: Disabled the quick save function when the preset name has changed, to avoid overwriting the previous saved preset.
- Fixed issue in chord detection for 5th-multiloop samples with MIDI-note-on that are just a few samples apart.
- Corrected the position of the "NUM WAVES" dial in the resampler editor.
- Prev/next preset now works correctly when preset search is active.
- OSC sound browser search is reset when the sound browser is closed (to avoid confusion when coming back later and seeing just a few sounds).
- Preset preview with progress bar and stop button. Additionally, any note will stop the preview, and any new preview will stop the synth. This is to avoid simultaneous audio from the preview and the synth.
- OSC quantizer: incoming MIDI option is now set correctly for the selected osc and not just for OSC1.
- Quantizer preset browser context shows the correct selected preset.
- Converting samples to any expansion content type will cause an update of the OSC-Soundbrowser to show new samples as intended.
- Fixed: Rename preset in custom expansion not working.
- Fixed issue in drumkit where "Copy Sample to Slot X" was not working correctly.
- Fixed issue in granular/spectral with multisamples where the wrong root note was used.
- Fixed a rare crash when accessing internal content lists while these lists are being updated.
- Fixed an issue where the "SURPRISE ME" button at the preset-search yielded the same sequence of presets each time Avenger was opened.

2.0.5
- fixed an issue when importing custom expansions
- fixed an strange ui problem on windows/fl-studio when drumsample browser is open, the ui starts to lag.
- added datareadout to random arp distribution display
- fixed issue with two revers-end-sync notes.

2.0.4
- spectral-granular root-note is working as expected now
- fixed additional utf8 problems
- fixed a skin issue in random arp where the length and silence option buttons where switched
- fixed arp-randomizer not using notes after edit
- fixed a issue with drum sample reverse-end-sync on very long samples

2.0.3
- fixed a small memory leak
- fixed a crash that mostly occured on MAC when loading presets while ARP tab is visible.
- fixed an issue with xp image caching. UI should load a litte faster now if many expansions are installed.

2.0.2
- fixed extreme cpu usage when changing parameters vie MIDI or DAW automation
- macOS 10.13 support, rewrote framework functions that required macOS 10.15, so they now are available on 10.13.
- added "reimport settings" from expansion to xp browser. if fx presets or ARP-Module presets are missing, use this function
- reworked memory management for ARP keys to improve stability

2.0.1
- old factory.avxp expansion is not displayed when it is installed in parallel with a factory.avxp2
- new avenger activation bitmaps to reflect version 2.
- WINDOWS: fixed license activation carusel caused by an UTF-8 path name problem.
- WINDOWS: reimplemented version information in Avenger2 files. VMAN should display the version correct now. ( instead of n.a.)

2.0.0 (Short version)
- added new spectral module incl. spectral expander module
- added new single loop module
- added drumloops for drumkits
- added quantizer module for OSCs
- arpeggiator can now do ratchets
- arpeggiator randomize module
- midi export for arpeggiators
- added new 4k main GUI
- added the possibility of parallel filter routing
- 60hz smooth framerate support
- improved loading times of presets and samples
- improved cpu spikes and overall cpu consumption
- improved RAM usage
- added shimmer feature in Reverbs
- drum slots/editor can now do bitrate reducing per slot
- new drumkit browser - swap single sounds on the fly
- new pitch envelope for each drumslot
- ability to use single wav loops in the multi loop module
- added new macro controller sub tabs
- added a fifth AMP, FLT, SHP, LFO tab
- added a new row with categories in the search info tags (Weird/Misc, Random/Generative Spectral/Additive)
- added new Factory 2 ROM library with 250 new presets, samples, wavetables and granular loops
- added 1500 new drumloops to the factory
- added tons of new sub-presets for all fx modules, envelopes etc.
- added new effect type: Q4ntum multi fx delay
- added new effect type: BitBite
- added new effect type: RutaVerb
- added new effect type: EnvFollower
- improved stability
- improved chord detection modes
- updated old skins for 2.0 compatibility
- auto preview (audio) for presets
- many new impulse responses for our Impulse reverb
- dozens if not hundreds of minor fixes and changes